Tie Boss Hunter's Special

Sale price Price $129.99 Regular price ~~$0.00~~ Unit price per

Shipping calculated at checkout.

NOTE: For all International and large quantity sales please call 1-877-900-BOSS (2677).

Product Specifications:

Maximum load limit: 300 lbs or 136 kgs

Kit Includes:

1 Block and Tackle
- (1) 3/8” Tie Boss with 35 feet of rope
- 2 Tie Boss Pulleys
- 1 Steel G and S Hooks
Additional (3) 3/8” Tie Boss
- Each with 15 feet of solid braid polypropylene rope.
- 3 Steel G and S Hooks

Open image in slideshow, deer hoist block and tackle

Open image in slideshow, quarters of meat hanging

Open image in slideshow, lifting up a deer with ease

Open image in slideshow, fitch wheel hitch

Simply attach hooks and pull rope to lift or tie down almost any load!

Always evaluate workload and inspect Tie Boss and rope before using.

Read Warnings and Warranty information before using.

Never use Tie Boss to hold human weight.

Remember a workload secured with Tie Boss Tie Down will only be as strong as Tie Boss Tie Down load limits and to what the hooks are attached.

Inspecting and Replacing Rope
Rope will stretch and degrade with time and use. Use Tie Boss supplied rope or Tie Boss approved rope ONLY. All ropes are not made the same way and can stretch, fray or break differently. Tie Boss guarantees performance only with Tie Boss approved rope. Always test a new rope to ensure that Tie Boss Tie Down teeth engage rope and holds without slipping.

Tie Boss Recommends tying a double half hitch under lock tab for extra security during transit or storage.

Always evaluate workload and inspect the Tie Boss and rope before each use. Read enclosed instructions completely before using your Tie Boss. Failure to read these warnings can result in serious personal injury and /or property damage. Failure to observe the enclosed product instructions and warnings may void Limited Warranty.

Do not use if damaged
Do not exceed load limits of Tie Boss Tie Down or rope
Avoid sharp edges, pinch points, abrasive or hot surfaces
Secure items as tightly as possible during transit - shifting loads may exceed working load limit of Tie Boss
Inspect tie-down after 10 miles and every 50 miles thereafter
Never hoist items over persons or animals
Never use a Tie Boss Tie Down to hold human weight

Insert head hook into hole at hooded top of Tie Boss as illustrated above.

Inspecting and Replacing Rope

Rope will stretch and degrade with time and use. Use Tie Boss supplied rope or Tie Boss approved rope ONLY. All ropes are not made the same way and can stretch, fray or break differently. Tie Boss guarantees performance only with Tie Boss approved rope. Always test a new rope to ensure that Tie Boss Tie Down teeth engage rope and that it holds without slipping.

Thread rope through eye of tail hook and secure with a nonslipping knot in the rope BELOW THE TAIL HOOK. TAIL HOOK SHOULD SLIDE FREELY ON ROPE ABOVE KNOT. See Tie Non-Slipping Knot instructions.

Attach head hook and tail hook to sturdy locations (separate from load) Select locations that ensure load will be held in place when Tie Boss rope is tightened. Remember a workload secured with Tie Boss Tie Down will only be as strong as to what the hooks are attached.
TO SET: Pull free rope until desired tension is obtained, then with same tension lower rope into teeth to automatically lock rope into place.
TO LOCK: Always secure rope by locking it under LOCK Tab. Tie Boss recommends tying a double half hitch under lock tab for extra security during transit or storage.
TO RELEASE: Before releasing a load, ensure that it will not result in a dangerous shift and that area around is safe. Remove rope from under LOCK Tab. Grip rope and pull with more tension / weight than load and lift it out of teeth at a 45° degree angle, release load by allowing rope to pass through Tie Boss Tie Down.

Lifting Loads with Tie Boss *

Attach head hook to sturdy location (separate from load). Select locations that will support weight when lifted. Remember a workload secured with Tie Boss Tie Down will only be as strong as to what the hooks are attached.
Attach tail hook to a sturdy area of load.
TO SET: Pull free rope until desired tension is obtained. Hold tension and lower rope into teeth to automatically lock rope in place. Tie Boss recommends tying a double half hitch under lock tab for extra security Lduring transit or storage.
TO LOCK: Always secure rope by locking it under LOCK Tab
TO RELEASE: Ensure that you are strong enough to support the released workload, that release will not result in a dangerous shift in load and that area below a lifted item is clear. Remove rope from under LOCK Tab. Grip rope and pull with more tension / weight than load and lift it out of teeth at a 45 degree angle, lower/release load by allowing rope to pass through Tie Boss Tie Down.
When releasing large loads, belay/wrap pull rope around fixed object to control load.

* To Lift Loads Easier add Tie Boss Pulleys

Adding 1 pulley provides a 2 to 1 mechanical advantage (i.e. 100 lbs. feels like 50 lbs). Adding 2 pulleys provides a 3 to 1 mechanical advantage (i.e. 150 lbs. feels like 50 lbs).

Install Hooks and Rope (see Diagrams 1-3 as shown earlier)
Ensure rope is long enough. One pulley setup requires rope length = 3 times distance lifted
Attach head hook to secure location, allowing rope to hang freely (see Diagram 5, A)
Insert tail hook into hole at open end of Tie Boss Tie Down body (closest to LOCK tab), adjusting tension to form a long hanging loop (see Diagram 5, B)
With pull rope in locked position, drop pulley onto hanging loop (see Diagram 5, C)
Pull down on pulley hook, ensuring rope rests into groove of pulley wheel
Attach weight or item to be lifted onto pulley hook (see Diagram 5, D)

Install Hooks and Rope (see Diagrams 1-3 as shown earlier)
Ensure that you have enough rope to thread through two pulleys – 4 times distance being lifted
Attach head hook to secure location, allowing rope to hang freely
Insert pulley hook of pulley #1 into hole at open end of Tie Boss Tie Down body (closest to Lock Tab), see Diagram 6, A)
Adjust tension of rope to form a hanging loop below pulley #1 by looping rope over top of pulley #1, ensuring rope slides into groove of pulley wheel. (see Diagram 6, B)
With pull rope in locked position , secure tail hook into hook holeat top of pulley #2 and drop pulley #2 into hanging loop (see Diagram 6,C)
Pull down on lower pulley hook, ensuring rope rests into grooves of both pulley wheels
Attach weight or item to be lifted onto lower pulley hook (see Diagram 6,D)

How to Secure ATV or Snowmobile on Trailer*
Tie downs shall be attached to the mounting points on the vehicle that are specifically designed for that purpose.

Always use (4) Tie Boss 3/8" Tie Downs - one is each corner. Tie downs shall restrain the vehicle from moving sideways, forward, backward and vertically.

Read Instructions for Use and Warnings to prevent injury. Tie Boss LLC is not responsible in any way for the attachment or installation of Tie Boss and is not liable for any damage resulting from its attachment or improper use. Liability of this product is limited to purchase price it Tie Boss Tie Down proves to be defective in material and / or workmanship.

To Secure 1200 lb. Vehicle:

Use four (4) 3/8" TIE BOSS
Secure each corner to trailer (See Four Step instructions below)
Each 3/8" Tie Boss is rated for 300 lbs. or 136 kgs

To Secure 1500 lb. Vehicle:

Use four (4) 3/8" TIE BOSS (See Four Step instructions below)
Add additional 3/8" Tie Boss across vehicle (anchor point to anchor point)
Each 3/8" Tie Boss is rated for 300 lbs. or 136 kgs

Four Step Instructions

Step 1:

Attach head hook to anchor point on truck.

Step 2:

Thread tail hook through ATV Rack.

Step 3:

Secure tail hook into hole in Tie Boss body.

Step 4:

Pull rope to tighten.

Step 5:

Repeat on all corners of ATV.

"The Tie Boss Block and Tackle is simple to use and turns a two-man job into a one-man job. It worked great for getting my buck hoisted up the meat pole."

Larry Russell, Attica, MI

"This is the best block and I have used, and I've been using them for over 50 years! Quality and durability were all excellent, but its best feature is the simple lock and release."

John Davis, Orlando, FL

"...I was impressed after trying Tie Boss tie downs last winter. These 3m (10’), 3/8” rope tie downs have no moving parts. The 124kg (275lb) max load rope runs through a patented, serrated jam cleat and either locks securely into place or releases easily with one hand."

Craig Nicholson, The Intrepid Snowmobiler

"What I liked about the product was how easy it was to secure. I could pull it tight to secure it with one hand and could even do so with winter gloves with no loss of effectiveness. Also, releasing the Tie Boss is quite simple as well. Compared to similar products on the market, there are no hard to reach releasing mechanisms on this one."

Jonathan Fassnacht, Military Hunting and Fishing

"I am a champion for this product and tell everyone I know about it. I recently expanded my tool kit to include the Tie Boss block and tackle system. It saves my back in managing a heavy load that I formerly struggled with by myself and once again it is simple to use. You can’t go wrong with Tie Boss!!!"

Santo Galatioto, Orange, Connecticut

"By far the best block and tackel I have ever used!"

Richard Baese, Salt Lake City, Utah